NEV2060
NEV2 Series Liquid Ring Vacuum Pumps — representative unitNEV2060 liquid ring vacuum pump — NEV2 Series Liquid Ring Vacuum Pumps.
4 configurations listed for this model.
NEV2060Capacity27–34 m³/hMotor range0.81–1.27 kWConfigurations4Quote this model →
| Model | Capacity (m³/h) | Motor (kW) | Weight (kg) | Noise (dB) | Material | Voltage | Order No. |
|---|---|---|---|---|---|---|---|
| NEV2060 | 27 | 0.81 | 34 | 62 | cast iron body / cast iron cover / aluminium bronze impeller | 220△/380Y | NEV20600NE002P |
| NEV2060 | 27 | 0.81 | 40 | 62 | cast iron body / cast iron cover / aluminium bronze impeller | 220△/380Y | NEV20600HE002P |
| NEV2060 | 27 | 0.81 | 24 | 62 | cast iron body / cast iron cover / aluminium bronze impeller | 220v/380v | NEV20600NC002P |
| NEV2060 | 34 | 1.27 | 24 | 65 | cast iron body / cast iron cover / aluminium bronze impeller | 220v 380v | NEV20600NF074P |
We verify flanges, bolt pattern and shaft height against the original drawing; if it doesn't match, we don't quote.
Spare parts for NEV2060
Wear parts we supply for this frame, with typical service life. Send the model and serial (or a nameplate photo) and we confirm each part against the original drawing.
| Part | Class | Typical interval |
|---|---|---|
| Impeller | Wear part | 2–5 years |
| Pump casing | Semi-wear | 5–10 years |
| Head / Cover | Semi-wear | 5–10 years |
| Port plate | Wear part | 2–4 years |
| Mechanical seal | Wear part | 1–2 years |
| Gland packing | Wear part | 6–12 months |
| Bearing | Wear part | 2–3 years |
| Shaft | Semi-wear | 8+ years |
| Shaft sleeve | Wear part | 2–4 years |
| Coupling | Semi-wear | 5 years |
| Coupling element | Wear part | 1–2 years |
| Gasket set | Wear part | Every overhaul |
| O-ring kit | Wear part | Every overhaul |
| Check valve | Wear part | 3–5 years |
| Repair kit | Kit | Every overhaul |
Request spare parts for NEV2060 → · Full parts catalogue
What you get with the quotation
Tell us the duty point (capacity, suction pressure, seal-liquid temperature) and we return, normally within one working day:
- Performance curve — capacity against suction pressure at your seal-liquid temperature — not a catalogue figure
- Dimensional outline drawing — flanges, bolt pattern, shaft height, so you can check the fit before ordering
- Material specification — wetted-part materials for your gas and liquid, with certificates on delivery
- Utility figures — seal-liquid flow and motor rating, for sizing the supply and the starter
If the drawing does not match your original, we say so and do not quote.