2BE1-503
2BE1 Series Water Ring Vacuum Pumps — representative unit2BE1-503 liquid ring vacuum pump — 2BE1 Series Water Ring Vacuum Pumps.
6 configurations listed for this model.
2BE1-503Capacity6,780–11,652 m³/hUlt. pressure33 mbarMotor range132–355 kWConfigurations6Quote this model →
| Model | Capacity (m³/h) | Ult. pressure (mbar) | Motor (kW) | Speed (rpm) | Drive |
|---|---|---|---|---|---|
| 2BE1-503 | 6,780 | 33 | 132 | 266 | V-belt |
| 2BE1-503 | 7,680 | 33 | 160 | 298 | V-belt |
| 2BE1-503 | 8,310 | 33 | 185 | 330 | V-belt |
| 2BE1-503 | 9,294 | 33 | 220 | 372 | V-belt |
| 2BE1-503 | 10,458 | 33 | 280 | 420 | V-belt |
| 2BE1-503 | 11,652 | 33 | 355 | 472 | V-belt |
We verify flanges, bolt pattern and shaft height against the original drawing; if it doesn't match, we don't quote.
Spare parts for 2BE1-503
Wear parts we supply for this frame, with typical service life. Send the model and serial (or a nameplate photo) and we confirm each part against the original drawing.
| Part | Class | Typical interval |
|---|---|---|
| Impeller | Wear part | 2–5 years |
| Pump casing | Semi-wear | 5–10 years |
| Head / Cover | Semi-wear | 5–10 years |
| Port plate | Wear part | 2–4 years |
| Mechanical seal | Wear part | 1–2 years |
| Gland packing | Wear part | 6–12 months |
| Bearing | Wear part | 2–3 years |
| Shaft | Semi-wear | 8+ years |
| Shaft sleeve | Wear part | 2–4 years |
| Coupling | Semi-wear | 5 years |
| Coupling element | Wear part | 1–2 years |
| Gasket set | Wear part | Every overhaul |
| O-ring kit | Wear part | Every overhaul |
| Moisture separator | Semi-wear | 8+ years |
| Check valve | Wear part | 3–5 years |
| Repair kit | Kit | Every overhaul |
Request spare parts for 2BE1-503 → · Full parts catalogue
What you get with the quotation
Tell us the duty point (capacity, suction pressure, seal-liquid temperature) and we return, normally within one working day:
- Performance curve — capacity against suction pressure at your seal-liquid temperature — not a catalogue figure
- Dimensional outline drawing — flanges, bolt pattern, shaft height, so you can check the fit before ordering
- Material specification — wetted-part materials for your gas and liquid, with certificates on delivery
- Utility figures — seal-liquid flow and motor rating, for sizing the supply and the starter
If the drawing does not match your original, we say so and do not quote.